- Based on the installation, the Basin can be divided into:
Wall type: This is space saving, so pay attention to screws and racks that hold the wall if it is loose or not, it may fall down due to twisting. This type of adaptive exhaust to the wall. Type pallet: The support on the leg is much stronger, it is not easy to be out of shape, and they always seem good.
Table type: It can also be divided into types on the table and in the table. In the table table is installed in the table, easier to clean and wash.
The basin has three holes:
Faucet; Spillway; Loss of discharge.
Under tap settings, the tap installation hole can be divided into:
No holes: Typically this is for tubs in the table, tap is usually mounted on the wall or on the table.
A hole: Cold water and hot water enter the same pipe, with the fibers at the bottom of the tap, which can stabilize the hole through the particles.
Three holes: The holes have two sizes: 4 inch and 8 inch. It can be set up with hand washers or hand washers (including 4 inch and 8 inch two sizes). Cold water and hot water enter the various pipes, the plane on either side of the faucet.